This page gives a guide to configuring the Funnelback web crawler. The web crawler is used to gather pages for indexing, by following hypertext links and downloading documents. The main collection creation page for a web collection describes the standard parameters used to configure the web crawler. These include giving it a start point, how long to crawl for, what domain to stay within and which areas to avoid.
For most purposes the default settings for the other crawler parameters will give good performance. This page is for administrators who have particular performance or crawling requirements.
A full list of all crawler related parameters (plus default values) is given on the configuration page. All of the configuration parameters mentioned can be modified by editing the collection.cfg file for a collection in the Administration interface.
Speeding Up Web Crawling
The default behaviour of the web crawler is to be as polite as possible. This is enforced by requiring that only one crawler thread should be accessing an individual web server at any one time. This prevents multiple crawler threads from overloading a web server. It is implemented by mapping individual servers to specific crawler threads.
If you have control over the web server(s) being crawled you may decide to relax this constraint, particularly if you know they can handle the load. This can be accomplished by using a site_profiles.cfg file, where you can specify how many parallel requests to use for particular web servers.
Two general parameters which can also be tuned for speed are:
Increasing the number of crawlers (threads) will increase throughput, as will decreasing the delay between requests. The latter is specified in milliseconds, with a default delay of one quarter of a second. We do not recommend decreasing this below 100ms.
WARNING: These parameters should be tuned with care to avoid overloading web servers and/or saturating your network link. If crawling a single large site we recommend starting with a small number of threads (e.g. 4) and working up until acceptable performance is reached. Similarly for decreasing the request delay i.e. work down until the overall crawl time has been satisfactorily reduced.
An incremental crawl updates an existing set of downloaded pages instead of starting the crawl from scratch. The crawler achieves this by comparing the document length provided by the Web server (in response to a HTTP head request) with that obtained in the previous crawl. This can reduce network traffic and storage requirements and speed up collection update times.
The ratio of incremental to full updates can be controlled by the following collection.cfg parameter:
- The number of scheduled incremental crawls that are performed between each full crawl (e.g. a value of '10' results in an update schedule consisting of every ten incremental crawls being followed by a full crawl).
This parameter is only referenced by the update system when no explicit update options are provided by the administrator.
An additional configuration parameter used in incremental crawling is the crawler.secondary_store_root setting. The webcrawler will check the secondary store specified in this parameter and not download content from the web which hasn't changed. When a web collection is created the Funnelback administration interface will insert the correct location for this parameter, and it will not normally need to be edited manually.
Crawling Critical Sites/Pages
If you have a requirement to keep your index of a particular web site (or sites) as up-to-date as possible, you could create a specific collection for this area. For example, if you have a news site which is regularly updated you could specify that the news collection be crawled at frequent intervals. Similarly, you might have a set of "core" critical pages which must be indexed when new content becomes available.
You could use some of the suggestions in this document on speeding up crawling and limiting crawl size to ensure that the update times and cycles for these critical collections meet your requirements.
You could then create a separate collection for the rest of your content which may not change as often or where the update requirements are not as stringent. This larger collection could be updated over a longer time period. By using a meta collection you can then combine these collections so that users can search all available information.
Alternatively, you could use an instant update. See "Updating Collections" for more details.
Specify Preferred Server Names
For some collections you may decide you wish to control what server name the crawler uses when storing content. For example, a site may have been renamed from www.old.com to www.new.com, but because so many pages still link to the old name the crawler may store the content under the old name (unless HTTP or HTML redirects have been set up).
A simple text file can be used to specify which name to use e.g. www.new.com=www.old.com. This can also be used to control whether the crawler treats an entire site as a duplicate of another (based on the content of their home page). Details on how to set this up are given in the documentation for the crawler.server_alias_file parameter.
The process which runs the webcrawler will take note of the max_heap_size setting in the collection's collection.cfg file. This will specify the maximum size of the heap for the crawler process, in MB. For example the default is set at:
This should be suitable for most crawls which crawl less than 250k URLs. For crawls over this size you should expect to increase the heap size up to at least 2000MB, subject to the amount of RAM available and what other large jobs might be running on the machine.
Crawling Dynamic Web Sites
By default the Funnelback webcrawler is configured to accept cookies by default, by having the following parameters set:
It is also possible to strip session IDs and other superfluous parameters from URLs during the crawl. This can help reduce the amount of duplicate or near-duplicate content brought back. This is configured using the following optional parameter (with an example expression):
The example above will strip off style and stylesheet parameters, or x=21037536 type parameters (e.g. session IDs). It uses regular expressions (Perl 5 syntax) and the regexp: flag is required at the start of the expression. Note that this parameter is normally empty by default.
Finally, the last parameter which you may wish to modify when crawling dynamic web sites is:
This parameter is used to specify the maximum number of files the crawler should download from a particular area on a web site. You may need to increase this if a lot of your content is served from a single point e.g. site.com/index.asp?page_id=348927. The crawler will stop downloading after it reaches the limit for this area. In this case you would need to increase the limit to ensure all the content you require is downloaded.
Crawling Password Protected Websites
Crawling sites protected by HTTP Basic authentication or Windows Integrated authentication (NTLM) is covered in a separate document on crawling password protected sites.
Sending Custom HTTP Request Header Fields
The following two parameters allow you to do this:
- Optional additional header to be inserted in HTTP(S) requests made by the webcrawler.
- Optional URL prefix to be applied when processing the crawler.request_header parameter
Some websites require a login using a HTML form. If you need to crawl this type of content you can specify how to interact with the forms using a crawler.form_interaction_file.
Once the forms have been processed the webcrawler can use the resulting cookie to authenticate its requests to the site.
Note: Form-based authentication is different from HTTP basic authentication. Details on how to interact with this are described in a separate document on crawling password protected websites.
Crawling With Pre-Defined Cookies
In some situations you may need to crawl a site using a pre-defined cookie. Further information on this configuration option is available from the cookies.txt page.
Crawling HTTPS Websites
This is covered in a separate document: Crawling HTTPS websites.
Crawling Sharepoint Websites
- If your Sharepoint site is password protected you will need to use Windows Integrated Authentication when crawling - see details on this in the document on crawling password protected sites.
- You may need to configure "alternate access mappings" in Sharepoint so that it uses a fully qualified hostname when serving content e.g. serving content using http://sharepoint.example.com/ rather than http://sharepoint/. Please see your Sharepoint administration manual for details on how to configure these mappings.
Limiting Crawl Size
In some cases you may wish to limit the amount of data brought back by the crawler. The usual approach would be to specify a time limit for the crawl:
The default timeout is set at 24 hours. If you have a requirement to crawl a site within a certain amount of time (as part of an overall update cycle) you can set this to the desired value. You should give the crawler enough time to download the most important content, which will normally be found early on in the crawl. You can also try speeding up the crawler to meet your time limit.
Another parameter which can be used to limit crawl size is:
This is the maximum number of files to store on disk (default is unlimited). Finally, you can specify the maximum link distance from the start point (default is unlimited):
For example, if max_link_distance = 1, only crawl the links on start_url. This could be used to restrict the crawl to a specific list of URLs, which were generated by some other process e.g. as a pre_gather command.
WARNING: Turning the max_link_distance parameter on drops the crawler down to single-threaded operation.
The crawler stores information about redirects in a file called redirects.txt in the collection's log directory. This records information on HTTP redirects, HTML meta-refresh directives, duplicates, canonical link directives etc.
This information is then processed by the indexer and used in ranking e.g. ensuring that anchortext is associated with the correct redirect target etc.
Crawler Couldn't Access Seed Page
In some scenarios you may see the following message in a collection's main update log:
Crawler couldn't access seed page.
This means the web crawler couldn't access any of the specified start URLs. To see why this is the case you should check the individual crawler logs in the "offline" view, which should give details on why it was unable to process the URL(s).
Changing Configuration Parameters During a Running Crawl
The following table shows which parameters can be changed during a running crawl:
|crawler.monitor_preferred_servers_list||Optional list of servers to prefer during crawl|
|crawler.monitor_url_reject_list||Optional parameter listing URLs to reject during a running crawl|
|crawler.request_delay||Increase/decrease delay time between HTTP requests|
- Crawling Password Protected Sites
- Crawling HTTPS websites
- Site Profiles
- Webcrawler logs